Contact
cross dimensional manufacturing

Additive Manufacturing

Powder bed and powder nozzle: How imagination and metal powder create groundbreaking solutions

Structures that seemed previously impossible. Efficient temperature control of entire geometries in confined space. Just two examples of how additive manufacturing opens completely new dimensions of thinking and working.

Technology.

In laser powder bed fusion (L-PBF), lasers are used to melt down high-performance metal powders layer by layer, before shaping them into the desired form. In laser metal deposition (LMD), on the other hand, a powder nozzle and lasers are used to deposit the material precisely on to the tool. We perform this process using a bespoke Trumpf TruLaser Cell 3000 with a horizontal and vertical rotary axis. We then use machining processes to refine the unmachined parts, turning them into complete functional components.

AM qualification and software.

Increase your skills in additive manufacturing with AMbitious. AMbitious is an independent division of toolcraft AG and provides training, consultation and software solutions in the area of additive manufacturing.
Find out more about the AM training, consultation & software provided by AMbitious.

Application.

Additive Manufacturing enables the production of highly complex geometries without the need for any tools – much more quickly and with fewer resources than traditional production methods. And the high-quality results speak for themselves. We can even fulfil the stringent requirements of aerospace, motor sports or medical technology. We are also certified according to Nadcap and by TÜV Rheinland. Using the powder nozzle, we can repair defective components, apply coatings and wear protection, and produce hybrid structures. Our nozzle technology and our machinery’s design also allow us to perform extreme high-speed laser material deposition (EHLA), which is a process developed by the Fraunhofer Institute for Laser Technology ILT.

Quality assurance.

In addition to analysing the powder used, toolcraft evaluates the properties of additively manufactured test pieces, as these are representative of the subsequently produced components. The dynamic strength of various metals is evaluated by fatigue testing. The resulting Wöhler curves indicate the relationship between the number of cycles to failure and the applied stress.

SEND ENQUIRY

Process Chain – Additive Manufacturing (L-PBF and LMD)

Additive Manufacturing (AM) relies much more heavily on practical experience in the various stages of the process than any other production method. toolcraft covers the complete process chain under one roof: from design to manufacturing and finishing. This is rounded off on the digital side with an end-to-end software solution – Siemens' NX. With its in-house quality assurance lab, toolcraft sets new standards as a service provider for additive manufacturing.

01Design und simulation
02Materials analysis
03Additive Manufacturing – L-PBF and LMD
04Heat treatment
05Further processing / finishing
06Quality assurance

01
Design und simulation

From traditional design to reverse engineering and topology optimisation, there are many sides to additive design. In addition to being printable, designs must be validated for their intended purpose. We do this by using powerful FEM and CFD software, which is fully integrated into our Siemens system. Combined with our use of warpage simulation software and component compensation methods, our employees’ long-standing expertise allows us to successfully follow the first-time-right approach.

02
Materials analysis

Our in-house measuring and testing laboratory provides us with the answers we need to ensure reliable component quality. Our analyses cover a wide range of aspects, ranging from the inspection of materials on receipt and process-related analyses (e.g. thickness measurements, structural analysis and analysis of mechanical properties) to the preparation of comprehensive reports.

03
Additive Manufacturing – L-PBF and LMD

We have a variety of powder bed equipment, including two machines with multilasers.
Two LMD (powder nozzle) systems complement this innovative machinery and enable additional areas of application such as coatings and layers to the existing material as well as to perform repairs and create joints.

04
Heat treatment

In order to reduce tension in the components (stress relief annealing/ solution annealing) and obtain the required material properties (mechanical properties, hardness and microstructure), we carry out heat treatment – in a chamber, convenction or vacuum furnace, depending on the project`s specific requirements.

05
Further processing / finishing

Automated and complete depowdering, separation of components and removal of support structures, creation of surface finishes for visually and technically flawless surfaces in accordance with customer specifications, quality assurance to support processes, machining further processing.

06
Quality assurance

Depending on our customer’s requirements, we may perform tactile and optical measuring in our in-house quality assurance department. In our lab, we not only analyse the powder used, but also inspect the properties of additively manufactured test pieces, as these are representative of the subsequently produced components. Here we work with static and dynamic test benches, among other things.

Discover the possibilities of additive manufacturing

Explore 3D object

Additive Manufacturing –
Key technology of the future. 

Convincing: How you as our customer can take advantage of Additive Manufacturing

Greater freedom of design.

  • Even the most complex geometries are possible.

Broader range of applications.

  • Also suitable for materials that are hard to machine.

Versatile technology.

  • Besides being used in laser powder bed fusion, the powder nozzle can repair defective components, apply coatings and wear protection, and produce hybrid structures.

Clear time and resource savings.

  • Parts manufactured within a few days, no need for tooling.

Profitability.

  • Weight reduction by means of FEM calculations and topology optimisation.

Innovation potential.

  • As your partner in research and development, we open new perspectives and market opportunities for you.

Verified quality from Germany.

  • Analysis of materials and additively manufactured samples (micrograph analysis, tensile strength testing, microstructure analyses, fatigue testing etc.)

Versatile material base – Mechanical strength, heat resistance, bio-compatibility, ...: When selecting the right material for laser sintering, we match our material and manufacturing expertise to your requirements. Metals we currently process include:

L-PBF

  • Aluminium alloys, such as AlSi10Mg
  • Titanium alloys, such as Ti6Al4V
  • Nickel-based alloys, such as Inconel® 718, Inconel® 625, Haynes® 282®
  • Stainless steel (1.4404)
  • Hastelloy® C22

LMD

  • Aluminum alloys, such as AlSi10Mg, AlSi12
  • Nickel-based alloys, such as Inconel® 718, Inconel® 625
  • Cobalt-based alloys, such as Stellite
  • Iron-based alloys, such as tool steels, hot work steels, stainless steels
  • Copper alloys, such as bronze
  • WC/TiC matrix alloys

Media library

Gain a direct insight into what we can do for you.

To load the YouTube video, please click here. By loading embedded videos, data is transmitted to YouTube. Further information can be found in our privacy policy.

A journey through time in additive manufacturing

To load the YouTube video, please click here. By loading embedded videos, data is transmitted to YouTube. Further information can be found in our privacy policy.

TRUMPF: Success story of toolcraft (laser metal desposition)

To load the YouTube video, please click here. By loading embedded videos, data is transmitted to YouTube. Further information can be found in our privacy policy.

Additive Manufacturing at toolcraft: highly complex geometries using powder bed and powder nozzle

To load the YouTube video, please click here. By loading embedded videos, data is transmitted to YouTube. Further information can be found in our privacy policy.

LMD technology - what is possible with laser metal deposition

To load the YouTube video, please click here. By loading embedded videos, data is transmitted to YouTube. Further information can be found in our privacy policy.

Complete Additive Solutions including both powder bed and powder nozzle with Siemens NX

To load the YouTube video, please click here. By loading embedded videos, data is transmitted to YouTube. Further information can be found in our privacy policy.

3D-printed injection moulding tool realized in cooperation with Siemens NX

To load the YouTube video, please click here. By loading embedded videos, data is transmitted to YouTube. Further information can be found in our privacy policy.

Complete process chain in 3D printing in metal with Siemens NX

To load the YouTube video, please click here. By loading embedded videos, data is transmitted to YouTube. Further information can be found in our privacy policy.

TRUMPF: Success story of toolcraft (Nadcap certification)

Case Studies

Examples of our work – clearly organised for your reading pleasure

Uncover your potential for innovation.

Your Pace makers for additive manufacturing

As your research and development partner, we can help you explore new avenues of business and market opportunities. Find out more about Cross-Dimensional Manufacturing, our unique consulting and manufacturing standard.

Challenge us to help you with your projects today! 

Send ENQUIRy

Phone +49 9172 6956-0

Stefan Auernhammer

Business Unit Manager Additive Manufacturing

Uwe Schulmeister

Business Unit Manager Additive Manufacturing