Contact
cross dimensional manufacturing

The future of mould making

A new age of injection moulding and mould making is dawning

toolcraft unites four technologies under one roof. An in-house project conducted with our partner Siemens demonstrates how these lines of business work together in a mutually beneficial way. The starting point was a mould for manufacturing a plastic component for the optical industry. The opportunities created by 3D metal printing allow new avenues to be explored and moulds to be completely re-imagined. The result was a mould with an optimised topology, which is not only easier to manufacture, but also significantly improves the process of producing the plastic component.

Used technologies:

The Starting Point:
Conventional mould for plastic injection moulding

The tool used to date comprises mould inserts, mould plates, mounting plates and standardised components. It measures around 125 x 125 x 130 mm (width x length x height) and weighs approximately 60 kilograms. The objective of the project was to improve the injection moulding process in terms of its cycle time, to make the unit less complex and to simplify the development process. Here, we benefited from our long-standing expertise in additive manufacturing. The considerable flexibility offered by 3D metal printing meant that the design engineer could completely reconfigure the insert and improve its topology in line with the specific loads and requirements. The result was a brand new mould – smaller, lighter and with integrated conformal cooling.

The Challenge:
Functionality preserved

Certain surfaces had to be retained during the topology optimisation process in order to preserve the functionality of the mould. Special requirements, such as the need for both parts to fit together precisely, the position of the ejector and the connectors for the machine's peripherals, had to be taken into account when optimising the topology. Options for later clamping the mould for reworking in a CNC machining centre also had to be considered during the design stage. In order to make full use of the technological advantages of additive manufacturing, functional surfaces, such as a conformal cooling channel with an optimised cross-sectional area, were integrated into the blank. A further challenge was the warping of components during the 3D metal printing process. Arranging the components in the best way possible and creating the necessary supports require an in-depth understanding of the process as well as experience in preparing data for additive manufacturing. This also has a strong influence on component warping. With the support of integrated process simulation, this warping can be calculated quickly and efficiently. This allows unwanted rejected components or disruptions in the construction process to be avoided from the outset. The "first time right" principle is an important indicator for the technological maturity of additive manufacturing and is especially crucial for industrial applications.

The Approach:
End-to-end process with Siemens NX

  • Redesign of the mould
  • Extraction of functional surfaces and specification of framework conditions
  • Choice of materials
  • Integration of conformal cooling
  • Topology optimisation
  • Verification using FEM calculations, cooling simulation
  • Data processing for 3D metal printing
  • Simulation of the printing process
  • Production (3D printing) and finishing (heat treatment, removal of supporting structure, surface treatment)
  • Reworking using machining methods and quality control (optical, tactile)
  • Use in injection moulding machine and production of components

The results:
A first step towards the future of mould making

The new and improved 3D-printed mould has much smaller dimensions. The original unit comprising several individual components has been reduced to a mould half. The optimised tool therefore weighs almost 50% less than its predecessor. The low weight means that less mechanical power is required and makes the mould easier to assemble into the injection moulding machine. At the same time, the tool is much higher performing despite the shorter development period. The lower mass and the conformal cooling reduces the cycle time by 30%, while ensuring that the component quality remains the same.

Media library

Get immediate impressions of our capabilities now!

To load the YouTube video, please click here. By loading embedded videos, data is transmitted to YouTube. Further information can be found in our privacy policy.

3D-printed injection moulding tool realized in cooperation with Siemens NX

Your Pace makers for high-end Precision Parts

As your research and development partner, we can help you explore new avenues of business and market opportunities. Find out more about cross-dimensional manufacturing, our unique consulting and manufacturing standard Cross-Dimensional Manufacturing!

Challenge us to help you with your projects today!

Send Enquiry

Phone +49 9172 6956-0

Thomas Lender

Business Unit Manager Injection Moulding